IWC Aquatimer Deep Three Mens Watch The 46mm IW355701, a 46mm titanium third-generation diver watch with a depth gauge and a rotating bezel system further demonstrates the innovative capabilities of the IWC Schaffhausen. Water resistant to 100 meters, it provides a complete backup system for dive computers when diving. Thanks to the titanium case, this watch is lighter than the previously introduced stainless steel watch, and the newly developed SafeDive system prevents accidental misalignment of the rotating outer ring. Thoughtful design makes it easier to wear.Replica IWC Aquatimer
The left side of the dial is a mechanical depth gauge marked with a needle. During the dive, the blue depth gauge pointer moves in the white measurement area as the water depth rises or falls. The red maximum depth pointer shows the maximum dive depth (up to 50 meters) and stays in this position.
The 3 o'clock time zone location is its date display area. The thickness of the watch is 16.5 mm. The side is protected by a clamp. The pressure measurement system is used. The water pressure enters the system through a small hole in the pressure transducer cover, which acts on the elastic membrane and pushes the shaft to the case. internal. This pressure is transmitted by the lever system, moving the two depth gauge hands in the center of the watch.
The other side of the screw-in crown is wrapped in rubber, and on the left and right sides are the maximum depth pointer reset button and the clutch system of the bezel system wrapped by titanium alloy. The lug of the lug is naturally connected to the rubber strap. The ear is equipped with a universal strap quick change system that allows quick removal of the strap without the aid of tools. The wavy black rubber leather strap is rugged and can withstand extreme pull. At the same time, it can flexibly adapt to the fluctuation of the wrist circumference and make the wearing more comfortable.Replica IWC Watches
The left side of the dial is a mechanical depth gauge marked with a needle. During the dive, the blue depth gauge pointer moves in the white measurement area as the water depth rises or falls. The red maximum depth pointer shows the maximum dive depth (up to 50 meters) and stays in this position.
The 3 o'clock time zone location is its date display area. The thickness of the watch is 16.5 mm. The side is protected by a clamp. The pressure measurement system is used. The water pressure enters the system through a small hole in the pressure transducer cover, which acts on the elastic membrane and pushes the shaft to the case. internal. This pressure is transmitted by the lever system, moving the two depth gauge hands in the center of the watch.
The other side of the screw-in crown is wrapped in rubber, and on the left and right sides are the maximum depth pointer reset button and the clutch system of the bezel system wrapped by titanium alloy. The lug of the lug is naturally connected to the rubber strap. The ear is equipped with a universal strap quick change system that allows quick removal of the strap without the aid of tools. The wavy black rubber leather strap is rugged and can withstand extreme pull. At the same time, it can flexibly adapt to the fluctuation of the wrist circumference and make the wearing more comfortable.Replica IWC Watches
No comments:
Post a Comment